Thank you for taking an interest in the NSN parts, aerospace parts, and military and defense parts that we offer here on Broadline AOG. You have taken a particular interest in part number 11727412, a Shaft Shouldered component that is listed alongside the NSN 3040003918469 for identification purposes. Manufactured by Quality Controlled Stamping Inc, part number 11727412 is available for procurement from our website at any time. As such, you are always welcome to fill out and submit the form that we have presented below to request a quote for your comparisons. Simply provide us important information like your target price and expected shipping time frame, and within 15 minutes or less, a member of our staff will present you with a tailored solution.
To ensure that you are only procuring exactly what you require for your operations, we always list all parts alongside applicable designations for identification. For example, part number 11727412 specifically falls under FSC 3040 Miscellaneous Power Transmission Equipment, allowing you to find other products that serve similar applications. Additionally, this part is manufactured under CAGE Code 11184, allowing you to identify the specific Quality Controlled Stamping Inc facility where this part traces back to. With this, you can start procurement with us at any time, knowing that we will do all that we can to fulfill your exact needs with competitive pricing and rapid lead times for your benefit.
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-391-8469 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 003918469 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11727412 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND INTERNALLY THREADED |
| AAHW | SECOND END GROOVE WIDTH | 0.0625 INCHES MINIMUM AND 0.0781 INCHES MAXIMUM |
| AAHX | SECOND END GROOVE DIAMETER | 0.2400 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.453 INCHES MINIMUM AND 1.458 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.2400 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.2556 INCHES MINIMUM AND 0.2627 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.3080 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| AMDS | FIRST END PITCH DIAMETER | 0.2917 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.8245 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.4368 INCHES MINIMUM AND 0.4373 INCHES MAXIMUM |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.516 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 2 |
| BDSQ | FIRST END SPLINE QUANTITY | 14 |
| CSPY | LARGEST STEP DIAMETER | 0.437 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 303SE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-52263 MIL SPEC SINGLE MATERIAL RESPONSE |
| ZZZV | FSC APPLICATION DATA | PERISCOPE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
